Two compact-cylinder reference photographs showing square end covers, grooved bodies, air ports and female-threaded rod ends
ACE series reference photographs. Confirm the offered complete model, acting type, mounting and current drawing separately from these illustrations.

ACE Series Compact Pneumatic Cylinders

A compact cylinder platform with single-rod, single-acting, double-rod and adjustable-stroke arrangements. TACE and TACED add a non-rotating yoke and require their own front-interface and travel checks.

ACE / ACED / ACEJ bores
12–125 mm
Single-acting and yoke bores
12–100 mm
Cushioning
Bumper
Compare specificationsPrepare a requirement brief

Choose the acting and yoke arrangement before the stroke.

The AirTAC 2020 catalog reference separates common cylinders, ASE/ATE single acting and TACE/TACED non-rotating-with-yoke strokes. Compare the appropriate range and working conditions, then confirm the actual supplied complete model.

Operating conditions
Parameter Catalog reference
Working medium Air filtered through a 40 μm element
Double-acting operating pressure 0.15–1.0 MPa
Single-acting operating pressure 0.2–1.0 MPa
Proof pressure 1.5 MPa
Standard temperature −20 to +70 °C
Double-acting speed 30–500 mm/s
Single-acting speed 50–500 mm/s
Cushioning Bumper
Stroke tolerance, stroke ≤100 mm +1.0 / 0 mm
Stroke tolerance, stroke >100 mm +1.5 / 0 mm

Apply the conditions to the documented model and bore range. Proof pressure is a test value. Confirm working conditions and the current offered configuration before ordering.

Bore range and nominal air connection
Bore (mm) ACE / ACED / ACEJ ASE / ATE TACE / TACED Nominal connection
12 Listed Listed Listed M5 × 0.8
16 Listed Listed Listed M5 × 0.8
20 Listed Listed Listed M5 × 0.8
25 Listed Listed Listed M5 × 0.8
32 Listed Listed Listed 1/8″
40 Listed Listed Listed 1/8″
50 Listed Listed Listed 1/8″
63 Listed Listed Listed 1/8″
80 Listed Listed Listed 1/8″
100 Listed Listed Listed 1/8″
125 Listed Not listed Not listed 1/4″

M5 connections are metric. For pipe connections the ordering reference lists blank PT or G; confirm the supplied thread and model. The dimension drawings label their pipe-port reference as G. No Rc or NPT ordering choice is established by this catalog.

Scroll the table horizontally to compare all columns.

Standard strokes and catalog Max.stroke
Arrangement Bore (mm) Listed standard strokes (mm) Catalog Max.stroke (mm)
Common double acting 12 5 10 15 20 25 30 35 40 45 50 50
Common double acting 16 5 10 15 20 25 30 35 40 45 50 55 60 70 75 75
Common double acting 20 5 10 15 20 25 30 35 40 45 50 55 60 70 75 80 90 100 100
Common double acting 25 5 10 15 20 25 30 35 40 45 50 55 60 70 75 80 90 100 110 120 125 150 150
Common double acting 32 / 40 5 10 15 20 25 30 35 40 45 50 55 60 70 75 80 90 100 110 120 125 150 160 175 200 200
Common double acting 50 / 63 5 10 15 20 25 30 35 40 45 50 55 60 70 75 80 90 100 110 120 125 150 160 175 200 225 250 250
Common double acting 80 / 100 / 125 5 10 15 20 25 30 35 40 45 50 55 60 70 75 80 90 100 110 120 125 150 160 175 200 225 250 275 300 300
ASE / ATE single acting 12 5 10 10
ASE / ATE single acting 16–100 5 10 15 20 25 25
TACE / TACED non-rotating with yoke 12 5 10 15 20 25 30 35 40 45 50 50
TACE / TACED non-rotating with yoke 16 5 10 15 20 25 30 35 40 45 50 55 60 70 75 75
TACE / TACED non-rotating with yoke 20 / 25 5 10 15 20 25 30 35 40 45 50 55 60 70 75 80 90 100 100
TACE / TACED non-rotating with yoke 32 / 40 5 10 15 20 25 30 35 40 45 50 55 60 70 75 80 90 100 100
TACE / TACED non-rotating with yoke 50 / 63 5 10 15 20 25 30 35 40 45 50 55 60 70 75 80 90 100 100
TACE / TACED non-rotating with yoke 80 / 100 5 10 15 20 25 30 35 40 45 50 55 60 70 75 80 90 100 100

Choose the arrangement before using the stroke row: the yoke range does not inherit the longer common-cylinder strokes. Other special strokes require confirmation. The source specifies the next longer standard-stroke envelope for a non-standard stroke, for example 23 mm uses the 25 mm standard envelope.

Scroll the table horizontally to compare all columns.

Match the rod and mounting codes to one model.

An ordinary female- or male-threaded rod and a non-rotating yoke use different ordering fields and mounting choices. Specify the magnet, model-specific mounting and actual air-port thread before completing the selection.

Model and rod arrangement
Configuration reference
Code Arrangement Documented bores (mm)
ACE Double acting, single rod 12–125
ASE Single acting, air-driven push 12–100
ATE Single acting, air-driven pull 12–100
ACED Double rod 12–125
ACEJ Adjustable stroke 12–125
TACE Double acting, non-rotating with yoke 12–100
TACED Double rod, non-rotating with yoke 12–100

The TACE/TACED yoke changes the front envelope, mounting and rod arrangement. Confirm the selected model drawing rather than using a base ACE cylinder envelope.

Scroll the table horizontally to compare all columns.

Ordering fields
Configuration reference
Field Catalog choices
Bore 12 16 20 25 32 40 50 63 80 100 125; ASE / ATE and TACE / TACED stop at 100
Stroke Use the common, single-acting or non-rotating-with-yoke row
Adjustable stroke ACEJ: 10 20 30 40 50 75 100; other listed models have no adjustment field
Magnet Blank: without magnet; S: with magnet
Rod type ACE / ASE / ATE / ACED / ACEJ: blank female thread or B male thread; TACE / TACED: no rod-type code
Mounting Use the model-specific mounting choices below
Pipe thread Blank: PT; G: G thread

M5 air connections remain metric. A B rod-end option is not listed for the yoke models. Confirm the complete model, mounting and actual supplied thread; the catalog does not establish any-combination availability.

Scroll the table horizontally to compare all columns.

Model-specific mounting codes
Configuration reference
Models Listed mounting choices
ACE / ASE / ATE Blank: no accessories; FA, FB, CA, CB, CR, FTC, LB, SDB
TACE Blank: no accessories; FB, CA, CB, CR, FTC
TACED Blank: no accessories; FB
ACED / ACEJ Blank: no accessories; FA, FTC, LB

Confirm mounting by model and bore. LB is not listed at 125 mm; CB/CR are listed for 32–125 mm and SDB for 12–25 mm. For a TACE request with SDB, confirm the exact assembly: SDB is marked selectable in the accessory matrix but is absent from the TACE ordering-code list.

Scroll the table horizontally to compare all columns.

Accessory combination requirements
Configuration reference
Assembly Catalog requirement
CR with CB CR cannot be used alone; use it with CB
SDB with CA SDB cannot be used alone; use it with CA
FTC with TCM2 Specify the matching pair and installation position; it is not freely adjustable

Accessory identity, dimensions and materials depend on bore and model. Use the complete accessory reference and current assembly drawing; the source codes do not establish stock or supplied-part identity.

Scroll the table horizontally to compare all columns.

ACE / TACE internal material reference
Configuration reference
No. / part Material and bore qualification
1 Screw Carbon steel
2 Back cover Aluminium alloy
3 Bumper TPU
4 O-ring NBR
5 Wear ring No (12–20 mm); wear-resistant material for other bores
6 Magnet Sintered neodymium-iron-boron metal for 12–20 mm; plastic for other bores
7 Piston seal NBR
8 Piston Aluminium alloy
9 Piston rod S45C
10 Body Aluminium alloy
11 Front cover Aluminium alloy
12 Bushing No (12–25 mm); wear-resistant material for other bores
13 Front cover packing NBR
14 Panel / yoke Aluminium alloy
15 Screw Carbon steel
16 Guide bushing Wear-resistant material
17 Guide rod Stainless steel for 12–40 mm; S45C for other documented bores

Confirm the exact bore and offered configuration; this reference is not a material certificate or independent compliance document.

Scroll the table horizontally to compare all columns.

ACE specification, stroke and ordering reference
ACE specification, stroke and ordering reference
AirTAC official 2020 catalog file, printed p.109. Complete original conditions, standard strokes, seven model codes and mounting/thread notes.
Open full-size reference
Accessory codes, selection matrix and LB mounting
Accessory codes, selection matrix and LB mounting
AirTAC official 2020 catalog file, printed p.113. Original accessory-code and selection matrix, material legend and LB drawing. Confirm model-specific accessory combinations against the current assembly drawing.
Open full-size reference

Compare the complete cylinder, rod and yoke envelope.

Dimensions are in millimetres unless a thread is identified. Open the matching model group: ordinary, single-acting, double-rod, adjustable-stroke and yoke layouts use different overall-length formulas. The reference states that magnetic and non-magnetic dimensions are the same; check the current assembly drawing including the chosen accessories.

ACE base dimensions
ACE body and female rod dimensions
Bore (mm) A AB AC AD □B Rod ØD Female rod E EA
12 40 5 35 10 27.5 6 M3 × 0.5 8
16 40 5 35 10 30 8 M4 × 0.7 10
20 43 6 37 10.5 35.5 10 M6 × 1.0 14
25 45 6 39 11 40 10 M6 × 1.0 14
32 51 7 44 14 49.5 12 M8 × 1.25 16
40 52.5 7 45.5 14.5 55 12 M8 × 1.25 16
50 53.5 8 45.5 14.5 65.5 16 M10 × 1.5 20
63 57 8 49 15 75.5 16 M10 × 1.5 20
80 63 9 54 16 95.5 20 M12 × 1.75 20
100 76 9 67 19 113.5 20 M12 × 1.75 20
125 92 11 81 20 134.5 25 M16 × 2.0 25

ACE and ASE overall length is A + stroke. ATE overall length is A + 2 × stroke, with AB + stroke on the rod side. Magnetic and non-magnetic dimensions are the same in this reference. Use the drawing for the selected acting type.

Scroll the table horizontally to compare all columns.

ACE mounting and air-port dimensions
Bore (mm) H J JA □JB K KA Port P PA PB ØR RA ØT TA
12 5 6 3.5 16 M4 × 0.7 18.5 M5 × 0.8 5.5 2 3.5 1.5 9 2.1
16 7 6 3.5 18 M4 × 0.7 18.5 M5 × 0.8 5.5 2 4.5 1.5 9 2.1
20 9 9 4.5 22 M5 × 0.8 23.5 M5 × 0.8 6 2 6.5 2.5 9 2.1
25 9 9 4.5 26 M5 × 0.8 23.5 M5 × 0.8 6 2 6.5 2.5 9 2.1
32 10 9 4.5 32.5 M6 × 1.0 28.5 G1/8 7.5 3 8.5 3.5 9 2.1
40 10 9 4.5 38 M6 × 1.0 28.5 G1/8 7.5 3 8.5 3.5 9 2.1
50 13 11 4.5 46.5 M8 × 1.25 30.5 G1/8 7.5 3 10.5 4.5 12 2.6
63 13 11 4.5 56.5 M8 × 1.25 30.5 G1/8 7.5 4 10.5 4.5 12 2.6
80 17 15 2.5 72 M10 × 1.5 — G1/8 8.5 6 12.5 6 12 2.6
100 17 15 2.5 89 M10 × 1.5 — G1/8 10.5 7 12.5 6 12 2.6
125 21 — — 110 M12 × 1.75 — G1/4 10.5 8 16.5 7 12 2.6

Dimensions are mm unless a thread is identified. P preserves the G-thread label in the drawing; select the actual pipe thread with the ordering code. A dash means no value is printed. Check the original view for screw-hole, countersink, depth and hole-count details.

Scroll the table horizontally to compare all columns.

ASE / ATE single-acting dimensions
ASE / ATE body and female rod dimensions
Bore (mm) A AB AC AD □B Rod ØD Female rod E EA
12 40 5 35 10 27.5 6 M3 × 0.5 8
16 40 5 35 10 30 8 M4 × 0.7 10
20 43 6 37 10.5 35.5 10 M6 × 1.0 14
25 45 6 39 11 40 10 M6 × 1.0 14
32 51 7 44 14 49.5 12 M8 × 1.25 16
40 52.5 7 45.5 14.5 55 12 M8 × 1.25 16
50 53.5 8 45.5 14.5 65.5 16 M10 × 1.5 20
63 57 8 49 15 75.5 16 M10 × 1.5 20
80 63 9 54 16 95.5 20 M12 × 1.75 20
100 76 9 67 19 113.5 20 M12 × 1.75 20

ACE and ASE overall length is A + stroke. ATE overall length is A + 2 × stroke, with AB + stroke on the rod side. Magnetic and non-magnetic dimensions are the same in this reference. Use the drawing for the selected acting type.

Scroll the table horizontally to compare all columns.

ASE / ATE mounting and air-port dimensions
Bore (mm) H J JA □JB K KA Port P PA PB ØR RA ØT TA
12 5 6 3.5 16 M4 × 0.7 18.5 M5 × 0.8 5.5 2 3.5 1.5 9 2.1
16 7 6 3.5 18 M4 × 0.7 18.5 M5 × 0.8 5.5 2 4.5 1.5 9 2.1
20 9 9 4.5 22 M5 × 0.8 23.5 M5 × 0.8 6 2 6.5 2.5 9 2.1
25 9 9 4.5 26 M5 × 0.8 23.5 M5 × 0.8 6 2 6.5 2.5 9 2.1
32 10 9 4.5 32.5 M6 × 1.0 28.5 G1/8 7.5 3 8.5 3.5 9 2.1
40 10 9 4.5 38 M6 × 1.0 28.5 G1/8 7.5 3 8.5 3.5 9 2.1
50 13 11 4.5 46.5 M8 × 1.25 30.5 G1/8 7.5 3 10.5 4.5 12 2.6
63 13 11 4.5 56.5 M8 × 1.25 30.5 G1/8 7.5 4 10.5 4.5 12 2.6
80 17 15 2.5 72 M10 × 1.5 — G1/8 8.5 6 12.5 6 12 2.6
100 17 15 2.5 89 M10 × 1.5 — G1/8 10.5 7 12.5 6 12 2.6

Dimensions are mm unless a thread is identified. P preserves the G-thread label in the drawing; select the actual pipe thread with the ordering code. A dash means no value is printed. Check the original view for screw-hole, countersink, depth and hole-count details.

Scroll the table horizontally to compare all columns.

ACED / ACEJ double-rod and adjustable dimensions
ACED / ACEJ double-rod and adjustment dimensions
Bore (mm) A, ACED A, ACEJ AB AC AF FA Adjustment thread E
12 45 57 5 35 17 4 M5 × 0.8
16 45 61 5 35 21 5 M6 × 1.0
20 49 68 6 37 25 6 M8 × 1.25
25 51 70 6 39 25 6 M8 × 1.25
32 58 78 7 44 27 6 M10 × 1.25
40 59.5 79.5 7 45.5 27 6 M10 × 1.25
50 61.5 81.5 8 45.5 28 7 M12 × 1.25
63 65 85 8 49 28 7 M12 × 1.25
80 72 92 9 54 29 8 M16 × 1.5
100 85 105 9 67 29 8 M16 × 1.5
125 103 127.5 11 81 35.5 10 M20 × 1.5

ACED overall length is A + 2 × stroke. ACEJ is A + 2 × stroke + adjustable stroke. E labels the adjustment-side thread shown on the ACEJ drawing; unmarked dimensions follow the ACE standard drawing as stated in the source. Magnetic and non-magnetic dimensions are the same.

Scroll the table horizontally to compare all columns.

TACE / TACED non-rotating yoke dimensions
TACE / TACED yoke dimensions
Bore (mm) A, TACE A, TACED AC □B DA □JB ØU ØUA V Z □ZA
12 46 51 35 27.5 5 16 3 12 M3 × 0.5 6 26.5
16 46 51 35 30 5 18 3 14 M3 × 0.5 6 29
20 51 57 37 35.5 6 22 4 17 M4 × 0.7 8 34.5
25 53 59 39 40 6 26 5 22 M5 × 0.8 8 39
32 61 68 44 49.5 7 32.5 5 28 M5 × 0.8 10 48
40 62.5 69.5 45.5 55 7 38 5 33 M5 × 0.8 10 53.5
50 65.5 73.5 45.5 65.5 8 46.5 6 42 M6 × 1.0 12 64
63 69 77 49 75.5 8 56.5 6 50 M6 × 1.0 12 74
80 77 86 54 95.5 9 72 8 65 M8 × 1.25 14 94
100 90 99 67 113.5 9 89 10 80 M10 × 1.5 14 112

TACE overall length is A + stroke; TACED is A + 2 × stroke. These values include the non-rotating yoke arrangement, with its own front interface. Unmarked dimensions follow ACE only where the source says so. No 125 mm yoke model or moment/load rating is inferred.

Scroll the table horizontally to compare all columns.

Male rod-end dimensions
Male rod-end dimensions
Bore (mm) AB Rod ØD Male rod E EA EB F FA H
12 15 6 M5 × 0.8 9 10 8 4 5
16 17 8 M6 × 1.0 11 12 10 5 7
20 22 10 M8 × 1.25 15 16 12 6 9
25 22 10 M8 × 1.25 15 16 12 6 9
32 26 12 M10 × 1.25 17 19 17 6 10
40 26 12 M10 × 1.25 17 19 17 6 10
50 30 16 M12 × 1.25 20 22 17 7 13
63 30 16 M12 × 1.25 20 22 17 7 13
80 37 20 M16 × 1.5 26 28 23 8 17
100 37 20 M16 × 1.5 26 28 23 8 17
125 51 25 M20 × 1.5 38 40 26 10 21

Use this rod-end table only for an arrangement whose ordering code provides the B option. The pull-type drawing adds the pull stroke to AB. The yoke models have no ordinary rod-type selector in the ordering reference.

Scroll the table horizontally to compare all columns.

ACE structure and complete base dimensions
ACE structure and complete base dimensions
AirTAC official 2020 catalog file, printed p.110. Complete original ACE-S/TACE-S structure and material table, base cylinder drawings and full dimensions.
Open full-size reference
ASE / ATE single-acting drawings and dimensions
ASE / ATE single-acting drawings and dimensions
AirTAC official 2020 catalog file, printed p.111. Original push/pull single-acting drawings, full dimension table and magnet-equivalence remark.
Open full-size reference
ACED / ACEJ, TACE / TACED and male rod dimensions
ACED / ACEJ, TACE / TACED and male rod dimensions
AirTAC official 2020 catalog file, printed p.112. Complete variant, yoke and male rod drawings, tables, length formulas and original remarks.
Open full-size reference
FA / FB, CA, CB and CR mounting dimensions
FA / FB, CA, CB and CR mounting dimensions
AirTAC official 2020 catalog file, printed p.114. Complete accessory drawings and dimension tables. CR requires CB; use the bore- and model-specific assembly.
Open full-size reference
SDB, FTC, TCM2 and rod-joint references
SDB, FTC, TCM2 and rod-joint references
AirTAC official 2020 catalog file, printed p.115. Complete accessory dimensions and original joint drawings. SDB requires CA, and TCM2 requires FTC with the specified installation position.
Open full-size reference
ACE platform, force and installation reference
ACE platform, force and installation reference
AirTAC official 2020 catalog file, printed p.108. Original platform overview, thrust tables and installation guidance. The catalog’s standard and space-comparison statements belong to the reference brand and do not establish the identity or fit of an offered cylinder.
Open full-size reference

Technical reference: AirTAC official 2020 catalog file, printed pp.108–115. This identifies a reference publication, not a confirmed current revision of the offered model. Verify the complete code, thread, mounting and current assembly drawing before ordering. Catalog data and series photographs do not establish JEMWON manufacture, independent certification or cross-brand fit.

Check working force, mounting and guidance together.

Available pressure, load direction and travel determine the basic cylinder selection. Include the rod projection, yoke front face, accessory stack and full moving envelope when comparing a replacement or a new installation.

Acting and working direction
Specify double acting, ASE air-driven push or ATE air-driven pull. Provide pressure at the cylinder, load, orientation, travel time and required return behavior.
Yoke and side load
For TACE/TACED provide the applied lateral force, moment arm and anti-rotation requirement. Confirm the permitted load and moment for the offered assembly; a base-cylinder thrust value does not rate its guidance.
Mounting and accessories
Select mounting by model and bore, including any paired CB/CR, CA/SDB or FTC/TCM2 assembly. Verify the full installation drawing and keep side load off an ordinary piston rod.
Rod, magnet and sensor
Specify female or male rod only where the code provides it. Confirm magnet and sensor requirements; the source’s equal magnetic/non-magnetic envelope does not identify a supplied sensor or wiring arrangement.
Air and environment
Use filtered air and clear the pipework before connection. Check moisture, temperature and protection from contamination against the actual service conditions.
Standard ACE and single-acting force at 0.5 MPa
Bore (mm) Rod Ø (mm) ACE single-rod push (N) ACE single-rod pull (N) ASE push-direction reference (N) ATE pull-direction reference (N)
12 6 56.5 42.4 40.0 25.9
16 8 100.5 75.4 78.4 53.3
20 10 157.1 117.8 127.4 88.1
25 10 245.4 206.2 210.1 170.9
32 12 402.1 345.6 352.5 296.0
40 12 628.3 571.8 556.8 500.3
50 16 981.7 881.2 875.5 775.0
63 16 1558.6 1458.1 1420.5 1320.0
80 20 2513.3 2356.2 2316.2 2159.1
100 20 3927.0 3769.9 3640.7 3483.6
125 25 6135.9 5890.5 — —

Double-acting values are for standard single-rod ACE; do not use them to rate ACED or TACED double-rod configurations. ASE push and ATE pull refer to different single-acting structures and their air-driven working direction; they are not two pneumatic directions of one single-acting cylinder or spring-return force ratings. Allow for friction and pressure loss. This table does not establish the yoke arrangement’s permitted moment or lateral load.

Scroll the table horizontally to compare all columns.

Specify one complete compact-cylinder assembly.

Include model, bore, acting type, stroke, adjustment if needed, magnet, rod or yoke interface, mounting, thread, load, pressure, sensor and quantity. For yoke models add lateral force and moment arm. For a replacement include the complete old code, current drawing and measured installation dimensions.

Prepare a requirement brief

The brief tool creates text on your device to copy or download. It does not send an online enquiry.

Does the ISO 21287 reference establish replacement fit?

The AirTAC catalog identifies ACE with ISO 21287. Confirm the actual supplied model, mounting pattern, rod thread, ports and complete installed envelope against the current drawing. The catalog statement does not establish cross-brand interchangeability or the fit of a yoke or accessory assembly.

Can TACE or TACED use the common-cylinder maximum stroke?

Use the separate non-rotating-with-yoke stroke rows. From 20 to 100 mm bore their listed maximum is 100 mm, while the common-cylinder range includes longer strokes. TACE/TACED are not listed at 125 mm bore.

Does a magnet change the cylinder dimensions?

The dimension remarks state that magnetic and non-magnetic dimensions are the same for these references. Still specify the magnet and confirm the actual sensor, mounting and wiring separately.

How should I choose a mounting accessory?

Use the model-specific ordering choices and the matching bore drawing. Confirm paired assemblies such as CR with CB, SDB with CA and FTC with TCM2. A TACE request with SDB needs specific confirmation because the ordering-code list and accessory matrix differ.