Manual control
valves.
Choose the operator action, then confirm the pneumatic symbol, return behaviour, working and exhaust ports, and mounting for the workstation.
Seven valve groups.
Five operator actions.
Compare foot pedal, hand lever, rotary, push-pull and inline slide operation. Then match the internal circuit, return behaviour and connections to the exact model.
4F Series
Foot-pedal 5/2 examples. Match the full operator action, lock or guard option and mounting to the workstation.
Shared pedal-range image; confirm the complete model and operator option.
3F / 3FM Series
3/2 normally closed pedal options. Compare the compact plastic 3FM and aluminium 3F constructions, ports and flow.
Shared pedal-range image; the pictured construction does not identify an exact 3FM model.
4H Series
Hand-lever 5/2 or 5/3 control. Specify the centre symbol, return action and separate working and exhaust ports.
4H210-08 sample shown; its nameplate applies to this pictured version.
4HV Series
Rotary 4/2 or 4/3 control. Match the rotation, circuit, mounting and retained-position or lock option.
Rotary range sample; confirm the selected mounting and operator configuration.
3L Series
Push-pull 3/2 control. Confirm the exact pneumatic symbol, port, flow and mounting for the selected model.
Shared push-pull range image depicts a 4L sample; confirm the actual 3L configuration.
4L Series
Push-pull 5/2 control. Compare working and exhaust ports separately, then check the current rating and mounting.
4L210-08 sample shown; confirm the selected model’s current datasheet and nameplate.
HSV Series
Inline 3/2 hand-slide control. Match connection size, male/female arrangement and the installation space.
Two range samples shown; connection arrangements and sizes depend on the selected version.
Choose the action.
Confirm the air path.
Start with how the operator uses the valve. Then specify ports and positions, the required state at rest and the return or retained action.
| Series | Operator / circuit | What to specify |
|---|---|---|
| 4F Series | Foot pedal; 5/2 examples | Standard, L lock or F guard |
| 3F / 3FM Series | Foot pedal; 3/2 normally closed | Aluminium 3F or compact plastic 3FM |
| 4H Series | Hand lever; 5/2 or 5/3 | Centre symbol, return action and exhaust port |
| 4HV Series | Rotary; 4/2 or 4/3 | Rotation, mounting and retained position |
| 3L Series | Push-pull; 3/2 | Port and flow |
| 4L Series | Push-pull; 5/2 | Working/exhaust ports and mounting |
| HSV Series | Inline hand slide; 3/2 | Port and male/female thread arrangement |
The handle and series code do not establish the full pneumatic symbol or mounting fit. Confirm the selected circuit and operator option; a lock or guard option alone does not establish a machine safety function.
Series data.
Check the complete model.
Match the operator, pneumatic symbol, return action and connections. Model tables and drawing references apply to the stated examples; confirm the current selected configuration before installation.
4F SeriesFoot-pedal model and operating references
Scroll sideways to read every column. Keyboard: focus the table area, then use the left and right arrow keys.
| Model | Function / option | Port | Body |
|---|---|---|---|
| 4F210-08 | 5/2 Way | 1/4″ | Aluminum Alloy |
| 4F210-08L | 5/2 Way (With Lock) | 1/4″ | Aluminum Alloy |
| 4F210-08F | 5/2 Way (With Guard) | 1/4″ | Aluminum Alloy |
| Parameter | Configuration |
|---|---|
| Medium | Air, filtered to 40 μm |
| Operating pressure | 0–1.0 MPa |
| Temperature | −20 to 70°C |
Confirm operator action and mounting. A lock or guard option alone does not establish a machine safety function.
Dimensioned variant examples.
The complete source sheet shows 4F21008, L, F and LF examples. Confirm the full selected model, operator option and current mounting drawing; these examples do not establish every size or a machine safety function.
Open original drawing3F / 3FM SeriesPedal, body, port and function references
Scroll sideways to read every column. Keyboard: focus the table area, then use the left and right arrow keys.
| Model | Port | Pedal | Body | Area / Cv |
|---|---|---|---|---|
| 3FM210-M5 | M5 | Plastic | Plastic | 3.0mm² (0.17) |
| 3F210-06 | 1/8″ | Aluminum | Aluminum Alloy | 12.0mm² (0.67) |
| 3F210-08 | 1/4″ | Aluminum | Aluminum Alloy | 16.0mm² (0.89) |
| Parameter | Configuration |
|---|---|
| Function | 3/2 normally closed |
| Operating pressure | 0–1.0 MPa |
| Actuation | Direct manual actuation |
3F and 3FM example drawings.
The source sheet shows 3FM210, 3F210 and 3F210L examples. Keep their different constructions and ports distinct, and confirm the current complete-model drawing before using any dimensions.
Open original drawing4H SeriesHand-lever circuit and separate working/exhaust ports
Scroll sideways to read every column. Keyboard: focus the table area, then use the left and right arrow keys.
| Model | Circuit | Working port | Exhaust port | Cv |
|---|---|---|---|---|
| 4H210-08 | 5/2 Way | 1/4″ | 1/8″ | 0.89 |
| 4H310-10 | 5/2 Way | 3/8″ | 1/4″ | 1.68 |
| 4H330C-10 | 5/3 Way (CC) | 3/8″ | 1/4″ | 1.00 |
4H330C has a closed-centre function. Confirm the complete symbol and return mechanism for the selected version.
The pictured 4H210-08 nameplate applies to that sample. Confirm the selected valve’s full symbol and current rating; a closed centre alone does not establish load holding or a safe stop.
4H assembly reference.
The sheet shows 4H210 and 4HA230C cutaways with a parts key. It is an assembly reference, not an external mounting-dimension drawing or confirmation of the 4H330C-10 configuration.
Open original drawing4HV SeriesRotary model, port and flow references
Scroll sideways to read every column. Keyboard: focus the table area, then use the left and right arrow keys.
| Model | Port | Area (mm²) | Cv |
|---|---|---|---|
| 4HV210-08 | 1/4″ | 16.0mm² | 0.89 |
| 4HV330-10 | 3/8″ | 30.0mm² | 1.67 |
| 4HV410-20 | 3/4″ | 95.0mm² | 5.27 |
Choose the 4/2 or 4/3 function and mounting/lock option separately.
4HVL assembly reference.
This source cutaway shows a 4HVL locking-handle variant and its parts key. It does not establish every 4HV model’s internal construction, rotary travel, mounting dimensions or a safety function.
Open original drawing3L Series3/2 push-pull model and port references
Scroll sideways to read every column. Keyboard: focus the table area, then use the left and right arrow keys.
| Model | Port | Effective area / Cv | Operating pressure |
|---|---|---|---|
| 3L110-06 | 1/8″ | 10.2mm² (Cv=0.60) | 0 ~ 1.0 MPa |
| 3L210-08 | 1/4″ | 17.0mm² (Cv=1.00) | 0 ~ 1.0 MPa |
| 3L310-10 | 3/8″ | 28.0mm² (Cv=1.65) | 0 ~ 1.0 MPa |
Lettered 3L outline views.
These whole source views use dimension letters without a complete-model numeric size matrix. Confirm the actual 3L model, connection standard and current mounting dimensions.
Open original drawing4L Series5/2 push-pull ports and operating references
Scroll sideways to read every column. Keyboard: focus the table area, then use the left and right arrow keys.
| Model | Working port | Exhaust port | Area (mm²) | Cv |
|---|---|---|---|---|
| 4L110-06 | 1/8″ | 1/8″ | 10.2mm² | 0.60 |
| 4L210-08 | 1/4″ | 1/8″ | 17.0mm² | 1.00 |
| 4L310-10 | 3/8″ | 1/4″ | 28.0mm² | 1.65 |
| Parameter | Configuration |
|---|---|
| Working pressure | 0–1.0 MPa |
| Temperature | −20 to 70°C |
| Body | Aluminium alloy |
The series text lists 0–1.0 MPa, while the pictured 4L210-08 sample is marked 0.05–0.85 MPa. Confirm the ordered model’s current datasheet and nameplate for the actual working conditions.
Lettered 4L outline views.
These whole source views use dimension letters without a complete-model numeric size matrix. Confirm the actual 4L model, working/exhaust connections and current mounting dimensions.
Open original drawingHSV SeriesInline slide model and connection examples
Scroll sideways to read every column. Keyboard: focus the table area, then use the left and right arrow keys.
| Model | Port | Body |
|---|---|---|
| HSV-06 | 1/8″ | Aluminum Alloy |
| HSV-15 | 1/2″ | Aluminum Alloy |
| HSV-25 | 1″ | Aluminum Alloy |
Specify SS (male/male), FF (female/female) or SF (male/female) connections and confirm the selected size.
HSV connection configurations.
The complete source sheet retains Standard, FF, SF and SS arrangements. Confirm the selected size, actual mating thread standard and mounting space; no universal numeric dimension or isolation approval is established.
Open original drawingShared operator optionsCode and action references for the applicable series
Scroll sideways to read every column. Keyboard: focus the table area, then use the left and right arrow keys.
| Series | Code / action | Meaning |
|---|---|---|
| 4F | L / F | Lock / guard option |
| 4H | A | Spring-return option |
| 4HV | 10 / 30 | 4/2 / 4/3 circuit |
| 4HV | Rotation | 90° for 4/2; 45° × 2 for 4/3 |
| HSV | SS / FF / SF | Male/male / female/female / male/female |
Match options to the complete model and installation drawing; available combinations depend on the valve.
Plan the operator access.
Define the circuit response.
Leave room for the full operator stroke, fittings and service access. Confirm the pneumatic symbol, return action and current mounting drawing for the selected model.
New machine
State the required pneumatic symbol, rest or centre state, operator action and return or retained-position requirement. Add working and exhaust connections, air pressure and conditions, mounting space and operator clearance.
Replacement
Record the full code, current nameplate and symbol, operator and return action, working/exhaust threads and actual pressures. Include mounting dimensions and references for available photographs or drawings.
- Choose the operator action
- Decide between foot, lever, rotary, push-pull and slide operation. Check access, travel direction and clearance through the operator stroke.
- Define the pneumatic symbol
- State ports/positions, normal state where applicable and centre symbol for three-position versions. The handle appearance does not establish the internal air path.
- Specify return or retained position
- Include spring return, manual return or retained-position requirement. The 4F lock and guard suffixes identify separate options.
- Check working and exhaust ports
- Working and exhaust connections can have different sizes. Include both when matching fittings, silencers and an existing installation.
- Compare flow and mounting
- Give actuator size, travel speed, pressure and mounting dimensions. Compare the exact model row rather than applying a series maximum to all variants.
Selection resources.
Questions before ordering.
Use the checklists with the selected model data, current nameplate and drawing. Keep the operator action and pneumatic circuit requirements together.
Common questions.
Which groups suit single-acting and double-acting circuits?
Compare 3/2 groups such as 3F / 3FM and 3L for single-acting circuits or pilot signals. Compare 5/2 groups such as 4F, 4H and 4L for double-acting cylinders. Confirm the actual symbol and required state at rest.
How do 3F and 3FM differ?
The selected 3F210 examples use aluminium pedals and aluminium-alloy bodies. The compact 3FM210-M5 uses a plastic pedal/body and M5 connection. Connection and flow data differ.
How do I specify a pedal lock or guard?
The 4F210-08L example includes a lock; 4F210-08F includes a guard. State operator action and the complete code, then check the option and mounting against the machine design.
Why show exhaust port sizes separately?
Several 4H and 4L models have smaller exhaust ports than working ports. Checking both helps match exhaust fittings and installation space.
What should I check when selecting an HSV slide valve?
Confirm the 3/2 flow function, connection size, male/female thread arrangement and installation space. If the application includes maintenance isolation or lockout, specify that requirement separately so the device and machine procedure can be assessed.
What helps identify a replacement?
Provide full model, symbol, port/thread, pressure, mounting dimensions and photographs. State whether the operator returns automatically or remains in position.
Bring the control
details together.
Start with the symbol and required rest or centre state. Add the operator and return action, working/exhaust connections, current pressure rating and mounting requirements.
Create a manual-valve briefCopy or download your component requirements.
- Operator and circuit
- Full code / symbol / rest or centre state / operator / return or retained position
- Ports and air conditions
- Working and exhaust sizes / actual thread standard / current pressure rating / air conditions
- Mounting and replacement
- Current drawing / mounting envelope / operator clearance / existing nameplate reference
- Order details
- Quantity / schedule / project destination, if relevant